The current version of Eve MotionBlinds motor supports Thread. This technology makes your smart home network more responsive, robust, and increases its reach – the only other thing you need is a is a home hub (Thread border router). Battery-operated Thread accessories, such as Eve MotionBlinds motor represent endpoints in your Thread network. 

By contrast, mains-powered Full Thread Devices (or FTDs) that are always on, such as Eve Energy, Eve Light Switch or Eve Water Guard, can act as router nodes within your Thread network and relay data packets. So, the more of these Full Thread Devices (FTDs) you have in your network, the more stable and greater its reach becomes. Learn more

Screws are not included, as every surface requires a different type of screw.

Before you begin measuring, note any obstructions such as door and/or window hardware that protrudes, heating pipes, or inward-turning doors and windows. 

Do you want to install your Eve Blinds inside the recess? Measure the width at three points of the window, keeping the smallest measurement. Measure the height at the centre of the window. Please note! We supply the blind with a reduction of 3mm (1/8 in) on both sides. Please indicate the exact size of your window recess and we will make sure that the blind fits exactly in between. Please don’t do any reductions yourself! Also take into account a system height of 10cm (3.9 in). for possible obstacles such as doors and windows turning inwards.

Before you begin measuring, note any obstructions such as door and/or window hardware that protrudes, heating pipes, or inward-turning doors and windows. 

Do you want to install your blinds outside the recess? Then measure the width and height of the window recess, with a small overlap. We recommend an overlap of 5cm (1.97 in). on both sides. Please add a total of 10cm (3.9 in). to the width measurement. To determine the height, add 10cm (3.9 in). (this is the height of system) to the height of your window recess. Would you like the blind to continue at the bottom? Then decide how many extra inches you want in height.

Our systems are available in two sizes, small and large. The small system is suitable for small to medium-sized roller blinds. For large blinds, only a large system is possible. Our advice is to start by putting together the roller blind for your largest window in the house. If it turns out that you can only choose a large system for this blind, we recommend doing the same for the rest of your blinds. This way you avoid having multiple roller blinds in your home with different systems. Is your largest blind also suitable for a small system? Then choose the system size that you prefer.

The distance from the end cap of the small system to the fabric, is 12 mm for the non-motor side and 18 mm for the motor side. For our large systems, it is 12 mm for the non-motor side and 24 mm for the motor side.

Yes you can. For automations, Apple Home makes no difference whether your devices were added to your home through HomeKit or Matter.

Follow these general rules when cleaning the outside of the device and its components:

• Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
• Do not use aerosol sprays, solvents, alcohol, or abrasives.

The wireless motors in our products have a battery, which you easily charge via a USB-C cable (not included). This can be your smartphones power adapter, for example. Charge at least once a year.

Resetting the blind results in deleting the end positions and connections of the blind with apps and remote controls. Shortly press the program button to activate program mode. The blind will start stepping up and down.Hold the reset/program button for at least 20 seconds to reset the blind. The blind will stop stepping twice. After the second stop, the blind will give one extra step to indicate that is has been reset.