Adapter für Eve Thermo
Eve Thermo kommt wie andere Thermostate mit dem Standardanschluss M30x1,5, dazu liefert Eve die Adapter RA, RAV, RAVL für Danfoss-Heizkörper mit aus. Eve Thermo lässt sich an über 90 Prozent der Heizkörper ganz einfach anbringen. Nur wer sehr alte Heizkörper zu Hause hat oder seltene Lösungen einsetzt, benötigt einen Adapter, um Eve Thermo mit dem Ventil des Heizkörpers zu verbinden.
Wer nach einem geeigneten Adapter für die Verbindung von Eve Thermo mit einer sehr alten oder seltenen Heizung sucht, wird unter anderen bei Eurotronic fündig. Eve Thermo ist übrigens “Made in Germany by EUROtronic“, das Unternehmen ist der absolute Spezialist beim Thema Heizungsregelung.
Alternativ lassen sich geeignete Adapter bei ELS finden, eine Übersicht gibt es bei eQ-3.
Eine gute Einführung in das Thema Ventiladapter findest du bei Haustechnikverstehen.de.
Oventrop-Ventil ohne Unterstützung von Thermostaten mit Stellmotor
Adapter Oventrop auf Heimeier mit Unterstützung von Thermostaten mit Stellmotor
Montierter Adapter
Eve Thermo an Adapter
Auch interessant.
Fünf gute Gründe, warum Kontaktsensoren in keinem HomeKit-Haushalt fehlen sollten
Am Beispiel der gängigsten Einsatzbereiche zeigen wir, wie du Eve Door & Window optimal nutzt.
Eve Thermo – Alle Funktionen
Das vielfach preisgekrönte Heizkörperthermostat Eve Thermo ist schnell installiert und eingerichtet. Und mit wenigen Feineinstellungen entfaltet sich der ganze Komfort vernetzten Heizens. Welche Funktionen Eve Thermo bietet, stellen wir dir hier im Detail vor.
Zeitpläne & anwesenheitsbasierte Steuerung – Smart Heizen mit Eve Thermo
Schön warm immer dann, wenn du zu Hause bist, energiesparend, wenn nicht – das ist smartes Heizen mit Eve Thermo. Jetzt ist es so einfach wie nie zuvor, komfortable Zeitpläne mit anwesenheitsbasiertem Heizen zu verbinden. Wir zeigen dir, wie!
- Reply
Hi Volker,I have a Giacomini valve. Do you know which adapter I need?
Thanks, Ole
- Reply
Hello Ole,according to my lists, this should do the job:
Giacomini to Heimeier M30x1,5
https://www.amazon.de/Adapter-Heimeier-Giacomini/dp/B0028Y1RM6
https://www.meinhausshop.de/HEIMEIER-9700-33.700-Adapter-fuer-Giacomini-Ventile
Best regards, Volker
- Reply
Thanks for your shift reply Volker, I will check that out. Ole- Reply
Hi,My radiator has Danfoss RA-N (013G0013) valve. Does any of included adaptors is matched with it?
Bests,
- Reply
Hello Sasan! Some say the RA adapter matches but I would google for an adapter RAN to M30x1.5. Best regards, Volker- Reply
Hi, Can these be mounted vertically?Thanks.
- Reply
Hello Juz! Yes you can and you may even want to flip the display. In Eve open Settings > Accessories > Eve Thermo > Installation and select Inverted. Have a great weekend, Volker- Reply
Is this compatible with the RA 2000 or would I need an adapter?- Reply
Hi Paul, I would guess you need an adapter, I do have this in my list, it's a germal URL, the only one I have:Cosmo with Danfoss RA 2000 to M30x1,5
https://www.hs-ersatzteilshop.de/Heizung/heizungstechnik/product-2691.html
Best regards, Volker
- Reply
Hi, I have just installed new radiators and as I can see, I have Herz valves installed. Can I use Eve Thermo on Herz Valves?Thank you,
Mate
- Reply
Hello Mate! Yes you can, but you will need an adapter as Herz valves have M25x1,5 and the standard is M30x1,5.The following will fit;
Herz M28x1,5 auf M30x1,5
https://www.amazon.de/gp/product/B0028YCQNA/
https://www.wolf-online-shop.de/HEIMEIER-Adapter-fuer-Herz-Ventile::666.html
These are german URLs but you will find out. Best regards, Volker
- Reply
Hello! Unable to install EVE on my German home radiator. Can someone help to identify the needed adapter, please? Thank you so much for all your help 🥲Valve: https://ibb.co/wNG9P6w
Control: https://ibb.co/ss8tFc8
- Reply
Hello Miklos!Please open a support ticket:
https://www.evehome.com/en/support/ticket
and let us know there the manufacturer name printed on the old, manual thermostat.
Best regards, Volker
- Reply
Hi Volker, We have bought an EVE THERMO Smart Radiator Valve, Apple HomeKit (Chipset 2020).I would like to ask you where can we buy adapter for this kit.
We would like to buy a RAVL adapter
Thank You, Regards, Erika
- Reply
Hello Erika! An adapter for Danfoss RAVL is part of the adapter set we ship Eve Thermo with. It is the small adapter without a screw to fix on the left hand side. Best regards, Volker- Reply
Hello there, I have an old radiator that im trying to fit the adaptor in but it's too big for it.The drayton TRV (BS6284)that I've taken out is 28mm and too big for the Eve TRV. I have tried the attachment but it doesnt fit. Any idea which one i need to buy?
- Reply
Hello Shehzad Mohammad! The provided adapters are for Danfoss valves RA, RAV and RAVL only. Drayton needs another adapter. The Drayton TRV 4 does not need an adapter at all, your seems to. Are you sure it is 28mm? I only found one that comes with M27 x 1,0? You may want to contact me at [email protected].Best regards, volker
- Reply
Hi,I got a problem when I install my eve. It fit on the valve but it’s to lose. En won’t work. I’ve got this valve https://ibb.co/1GTHYmw. Is there somebody that knows what adapter I need to use? Thanks for helping
- Reply
Hello Bas! This is more a support question. With more than 70 valves is the market it is not easy to find our by a photo. Please use email to [email protected] and send me the name that is printed on the old manual thermostat. Best regards, Volker- Reply
Hello,I have issues fixing the thermostat.
My current thermostat has an M28x1.5 connector from COMAP.
https://www.comap.be/sites/benelux/files/field/media/files/00014_2020-11_frf_prodatsh_tete-thermostatique-sensity_comap-c.pdf
I tried every adapter I found in the box and I can't make it fit with the Eve Thermostat.
Do you have an adapter for M28x1.5 ?
- Reply
Hello Yannick! The adapters provided are for Danfoss RA, RAV and RAVL only. You need an Adapter M28x1,5 to M30x1,5. I only have a URL for the German store, but you should find it where you live.https://www.amazon.de/Heimeier-Adapter-Thermostate-M28x1-M30x1/dp/B00VEA3R1Y
Best regards, Volker
- Reply
Bonjour, je n'arrive pas a installer eve thermo sur mon radiateur, les adaptateurs fournis ne semblent pas me permettre de visser le tête thermostatique dessus- Reply
Bonjour. Nous ne fournissons que les 3 adaptateurs les plus utilisés sur le marché (Danfoss RA, RAV et RAVL). Contactez le support technique sur evehome.com pour obtenir d'autres listes d'adaptateurs.- Reply
Good day,Just got my new eve termo but it won’t connect to my valve, could you help me finding an adapter for this valve.
best Regards
Foto of valve :
1.
https://share.icloud.com/photos/01RcKiZ0gDChhRTceiLo14wsA#Marienborn
2.
https://share.icloud.com/photos/0HvC_LRezcbPUMRFh6POhgxmA#Marienborn
- Reply
Hallo Jassim! You can't see it by looking the valve. Please send me an email at [email protected] and let me know the manufacturer name that is printed on the old manual thermostat. Best regards, Volker- Reply
Hi! Is thermostat compatible with Purmo valves? https://www.purmo.com/en/products/panels/compact.htm- Reply
Hello Normunds! You'd need to check for the valve used there. Eve Thermo comes with a standard connector M30x1,5 and adapters für Danfoss RA, RAV and RAVL. Best regards, Volker- Reply
Hello,I just bought 4 Eve Thermo (Second generation) and tried to install them on my heaters. I am using a M30x1 to M30x1.5 adapter from Oventrop (bought on Amazon.de, metal version, should be the first listing at the top).
Eve Thermo starts calibrating, you can hear the valve opening and closing but it always fails at about 75% of the progress bar giving me a „general installation error“. Resetting did not help either.
Any ideas that could get these things running? I can provide pictures of my heater when needed.
- Reply
Hello Dominik!This should not happen if the adapter is the correct one for the valve on your heater. Are you sure the adapter you got is the correct one? What was the manufacturer name on the old manual thermostat? You may want to contact me by mail at [email protected] to not open an ongoing thread here. Best regards, volker
- Reply
I have bought 6 eve thermo. We replaced piping and valves for our house. Brand new valves are danfoas RA-N models. I get constant E1 calibration error. I tested these before piping work, we had danfoss ravl valves and only one radiator I was able to calibrate thermo at that time, didnt spend much time thinking this as new valves were coming. But now still e1 error from multiplw valves and thermos.- Reply
Hello Tero!For a RA-N valve you need a special adapter to M30x1,5. No way using the provided ones, they are only for Danfoss RA, RAV and RAVL.
Best regards, Volker
- Reply
Hi Volker, i am going to install 4 Eve Thermo valves from Danfoss RA-N so you are saying they are not in the box? That part do i need to buy?Thanks, Stefan
- Reply
Hello Stefan! Eve Thermo comes with the standard M30x1,5 and we provide adapters for Danfoss valves RA, RAV, RAVL. The RA-N valve needs a different adapter, only have a german URL here:Danfoss RA-N auf M30x1,5
https://www.meinhausshop.de/Adapter-fuer-Danfoss-Ventile-RA-N-ersatz-fuer-Jung-A110
Best regards, Volker
- Reply
Hi Stefan,Did you try eventually? I did, and the included RA adapter did actually fit the RA-N valves.
- Reply
I have purchased 7 of these eve-thermo's 2 of them fit my floor level radiators without issue however the thread on the wall mounted radiators and the full wall bathroom radiator they dont the thread is too big if I use the smallest of the 3 adapters then the thread is too big- Reply
Hello Shane!Please check for the brand name printed on the old manual thermostat. It will give you a hint what adapter is to be used. You may also contact me at [email protected].
Best regards, volker
- Reply
Hello! I would like to ask if eve thermo is compatible with this radiator valve? Or do I need to replace the valve?http://kepkezelo.com/images/2xgghle35gec9utny1fm.jpeg
https://www.apple.com/hu/shop/product/HNRD2ZM/A/eve-thermo-intelligens-radi%C3%A1torszelep
- Reply
Hello Tóth!I don't know any adapter that would fit here. I would gon for a new valve at best with the standard M30x1,5.
Best regards, volker
- Reply
Norbert, Your valve can't work with connected valves as it seems to be an old manual one which must be opened/closed by turning the button by the hand. That kind of valves must be replaced by thermostatic ones.- Reply
Hi Volker,thanks, this did it!!!
actually all I needed to do was step 7+8
This situation happened with three valves. Worked and calibrated last year, not this year...
Nice work around.... I was slowly thinking I needed other adapters....
Anyway thanks a lot !!!!
best
- Reply
Hey Mark, glad it worked, I was pretty sure it will.This just happens.
I wich you a great start into the week, Volker
- Reply
I had Eve thermo working last year, now the batteries were dead so I replaced them. Now it will not calibrate anymore...What to do?
- Reply
Hello Mark,Please try the following step-by-step procedure including the trick with the 2 cent coin. We have recently learned that around 10% of the valves used in Germany have a slightly too small stroke, the coin compensates for this.
1. Delete Eve Thermo from Eve app
2. Un-mount Eve Thermo and make sure that you can move the valve on heater side (if not use grease and eventually hit the valve's body with a hammer to solve the problem)
3. Put new batteries in Eve Thermo ("Er" means either calibration problem or discharged batteries)
4. Press one of the arrow on screen until "Er" disappears (the screen will then show "no", which means "mounting" and the valve will move to a correct mounting position)
5. Hard reset Eve Thermo until the 66/99 appears on the LED.
6. Re-pair Eve Thermo in Eve app and follow instructions to mount it and calibrate it.
7. Insert a 2 cent coin into the valve holder of Eve Thermo.
8. Follow the assembly and calibration instructions.
If the code ER does not appear on the display of the Eve Thermo during step 4, please skip this step.
- Reply
Hi!Where to buy this adapter?
Argo
- Reply
Hello Argo!Depends on the valve the heater is using. Most customers search at Amazon or other places. You need to search for M30x1,5 and the valve name you have. Best regards, volker