CAS D'USAGE | Eve Room Eve Light Strip Eve Flare

Recevez une alerte en cas de pollution de l’air de votre logement

Oct 20, 2020 - Par Ina - Commentaires
 
 

Soyez informé lorsqu’il est temps d’aérer votre logement. Lisez la suite pour découvrir comment recevoir une alerte lumineuse rouge si la qualité de l’air à l’intérieur de votre logement est mauvaise. 

 

HomeKit n’envoie pas de notification relative à la qualité de l’air, mais vous pouvez résoudre le problème par vous-même en demandant à recevoir des alertes lumineuses rouges. Ainsi, vous et tous les membres de votre foyer recevrez systématiquement une alerte, même si vous n’avez pas votre iPhone sur vous. 

 

Pour commencer, vous devez vous procurer un capteur de type Eve Room pour détecter la qualité de l’air intérieur. Cet accessoire évalue la qualité de l’air en mesurant le niveau de COV dans votre logement. Les sources de composés organiques volatils sont très nombreuses : les meubles, l’électroménager, les jouets, les cosmétiques, mais aussi certaines activités comme la cuisine et le ménage... Nous-mêmes émettons aussi des COV ! Si vos fenêtres restent toujours fermées, les concentrations de COV à l’intérieur de votre logement peuvent atteindre des niveaux alarmants.

 

Avec Eve Room et Eve Light Strip, vous pouvez recevoir une alerte quand il est temps d’aérer votre logement, grâce à une automatisation simple. L’automatisation entre en action lorsque la qualité de l’air à l’intérieur de votre logement est égale ou inférieure à un niveau défini. Dans ce cas, Eve Light Strip (ou Eve Flare) émet une lueur rouge pendant la journée. Vous et les autres membres de votre foyer savez ainsi qu’il est temps d’ouvrir la fenêtre pour aérer. Grâce à l’automatisation, tout le monde passera une bonne nuit, car la lumière ne s’allume pas pendant vos horaires de sommeil. Personne ne veut recevoir une alerte rouge en pleine nuit !

Application Eve > Pièces > [Sélectionner la pièce dans laquelle Eve Room est installé] > Eve Room > Automatisation > Ajouter une règle > Qualité de l’air > Pire ou égal à (2 étoiles) > Ajouter > Suivant 

Ajouter une condition d’horaire > Heure après 7h/Heure avant 23h > Suivant 

Ajouter un scénario > Ajouter des actions > [Sélectionner la pièce dans laquelle Eve Light Strip est installé] > Eve Light Strip Alimentation activé/Couleur rouge > Ajouter > Suivant > OK > Attribuer un nom au scénario > Attribuer un nom à la règle

Pour exécuter l’automatisation, vous avez besoin d’un concentrateur. Si vous le souhaitez, il vous suffit de répéter la procédure pour ajouter une automatisation pour d’autres pièces. 

 

Si vous souhaitez optimiser davantage la qualité de l’air, ajoutez une autre règle qui se déclenche lorsque la qualité de l’air est égale à 3 étoiles, en configurant un scénario pour qu’Eve Light Strip ou Eve Flare émette une lueur orange. Et bien évidemment, vous pouvez aussi ajouter une règle pour que votre accessoire émette une lueur verte dès que la qualité de l’air à l’intérieur de votre logement revient à un niveau acceptable.

 

Capteur de qualité de l’air intérieur
En savoir plus

Nécessite iPhone ou iPad avec la dernière version d’iOS/iPadOS

 
HomeKit, maintenant compatible Thread
Ajouter au panier
Votre choix
Ajouter au panier
Livraison gratuite en Allemagne, TVA incl.
Votre choix
Choisissez votre pays
Ruban LED intelligent
En savoir plus

Nécessite iPhone ou iPad avec la dernière version d’iOS/iPadOS, réseau Wi-Fi (2,4 GHz 802.11b/g/n)

 
Ajouter au panier
Votre choix
Ajouter au panier
Livraison gratuite en Allemagne, TVA incl.
Votre choix
Choisissez votre pays
32 Commentaires
Matt
Hi, ER reported 4 stars air quality and I run my Dyson air purifier PH04 with full performance to purify my air but ER after 1h report still 4 stars and Dyson reported Good AQ(good is max) - 0-3ug/m3 PM2.5, 0-3ug/m3 PM10, Formaldehyd 0.009mg/m3, also in EVE app - surprisingly level is only worse of VOC.
Reply
Aug 23, 2023
Hello Matt! Eve Room measures tVOC, not measuring PM2.5, 0-3ug/m3 PM10, Formaldehyd 0.009mg/m3. Best regards, Volker
Reply
Aug 24, 2023
Bob
Hi. I am using the Eve Room to help me identify and solve a problem with my chimney. The readings are great BUT I would like to be able to download measurements and/or access history so I can figure out what solutions work and what is causing the problem. Is there a way to download or access historical data?
Reply
Apr 3, 2023
Hello Bob! Please open Eve Room in the app Eve and tap on the tini blue circle to access all measurements. In the next window tap on Measurements. Then tap on the tiny action menu left from Edit to export the historical data in Excel format. Best regards, Volker
Reply
Apr 5, 2023
Friedrich
Ich habe mir jetzt so eine Warnung programmiert, ist die Luftqualität schlecht, leichtet ein Flare rot.
Szene „Schlechte Luft“ und Regel „Schlechte Luft“
Muss ich jetzt eine zweite Szene/Regel erstellen, damit die Flare wieder ausgeht wenn die Luft besser wird?
Reply
Feb 4, 2023
Hallo Friedrich! Ja, Sie müssen für derartige Regeln immer eine zweite anlegen. Viele Grüße, Volker
Reply
Feb 8, 2023
Karl
Hallo, ich habe bei meinem Eve Room mittlerweile mehrmals beobachtet, dass das Display kurzzeitig vollständig auf hell umschaltet. Kurz darauf erscheint wieder die normale Anzeige. Ist das so gewollt?
Der Eve Room steht bei mir auf dem Schreibtisch, und ich nehme diesen Anzeigenwechsel immer im Augenwinkel wahr, wodurch ich dann kurzzeitig abgelenkt werden.
Reply
Jan 10, 2023
Hallo Karl! Eve Room nutzt ein hochwertiges e-Ink-Display, das macht genau das beschrieben in einigen Abständen, um das Einbrennen der Anzeige zu verhindern. Das ist alle s so gewollt. Viele Grüße, Volker
Reply
Jan 11, 2023
Jan
Hi! Is there a minimum distance the sensor should be kept from a wall? Does the proximity to a wall influence the measurement, and should it be placed far away from a wall?
Reply
Oct 14, 2022
Hello Jan! It should be away 2cm/1 inch as the two holes on the back are for ventilation of air for the tVOC sensor. Best regards, Volker
Reply
Oct 17, 2022
Niki
Hi, I bought a Eve Room and water Guard and was sure that Push notification will be part of the product. But now I read that it is not! This is a big problem and makes the product useless to me, since I need allerts while I'm not at home! You say in a comment above that it is not possible because HomeKit does not provid notivication. But what about your owne APP? The EVE app?? Why is that not able to send notivication? this is a very big shortcoming of this product! If there would be at least IFTTT, there would have been a solution! I'm very disapointet!
Reply
Jul 15, 2022
Hello Niki! Eve Water Guard doe support HomeKit notifications once a leak is detected. As Apple does not provide notifications for temperature or humidity in HomeKit, we can't either, sorry. Best regards, Volker
Reply
Jul 17, 2022
Pauline
Hi,
My VOC levels are around 1 which is pretty bad. Bedroom with no ventilation apart from window that remains closed during winter. Opening the windows for 10 min changes from 1 to 3 stars but obviously I can’t let it open when temperatures are around 0C outside. Based on client testimonials and your own tests, would an air purifier improve (3 starts or above) a room of about 11 square meters? Thanks
Reply
Jan 10, 2022
Hello Pauline! In case the purifier clears one of the following from the air:
https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/9_Gas_Sensors/Sensirion_Gas_Sensors_SGP3x_TVOC_Concept.pdf
it may help - but I doubt it. Best regards, Volker
Reply
Jan 11, 2022
Calion
Or you could enable HomeKit Notifications in your devices. https://support.apple.com/en-us/HT208939
Reply
Sep 7, 2021
Sadly, Home app notifications don't appear to work for the Eve Room. For most accessories, it shows "Status and Notifications" where you can set notifications. For the Eve Room sensors, however, it only shows "Status" in that area…which kinda sucks, because I'd much prefer your idea.
Reply
Oct 20, 2022
Hwello Cory! As HomeKit/Apple does not provide notifications for temperature or humidity, we can't either. Only Apple could change this. Best regards, Volker
Reply
Oct 20, 2022
UrdaMan
Is there any way to have an automation play a simple ring tone live Alert say if the temperature range rule is true? I need a simple Bluetooth enabled only alert. It no extra wfi home hub, a simple alert sound between two battery powered device Eve Home and my iPhone

Thanks
Reply
Jul 24, 2021
Hello UrdaMan! Sorry, this is not possible with HomeKit. A home hub is mandatory. But even with a home hub as HomeKit/Apple does not provide notifications for temperature (and humidity) this won't even work with a home hub, sorry. Best regards, Volker
Reply
Jul 25, 2021
Henkjan
Question, can Eve room be installed with a charger contected 24/7 ? Would this improve reachability? Would it harm the device in any way?

Br henkjan
Reply
Jan 18, 2021
Hello Henkjan!
One of my two Eve Room (2018) is connected to a charger 24/7 since two years. No problem, but no range extension of cause. Just keep in mind as for all of these batteries having it 24/7 attached, the battery life will decrease once you decide one day to use it without charger. Same applies to iPhones and other accessories. Best regards, Volker
Reply
Jan 18, 2021
Timo2
Ich habe ein ähnliches Problem.
2 eve room im Einsatz. Einer super. Der andere hat alle paar Wochen das Problem dass er immer nur 1 Stern anzeigt. Das dauert ca 1 Woche dann ist es wieder normal. Reset bringt keine Besserung
Reply
Jan 9, 2021
Hallo Timo! Meist ist die Luftqualität Schuld, wird nur ein Stern angezeigt. Hier reicht ein Putzmittel im Wischwasser, Deo oder andere Stoffe. Wenn das ausgeschlossen ist und auch ein Reset nicht hilft, musst Du das Gerät bitte beim Händler tauschen lassen. Viele Grüße, Volker
Reply
Jan 10, 2021
RK
Is it possible to simply get a notification on my phone? This would be much more convenient since I might not be in the same room with the light strip (eg out of town).
Reply
Jan 6, 2021
Hello RK! As HomeKit does not provide text notifications for temperature or humidity, this is not possible. Only Apple could integrate that. Best regards, Volker
Reply
Jan 7, 2021
Can the Eve app send a push message on iPhone when air quality changes?
Reply
Apr 27, 2022
Hello Paul! HomeKit/Apple does not provide notifications for temperature, humidity or air quality, so we can't either, sorry. Best regards, Volker
Reply
Apr 28, 2022
Stefan
Hallo, ich habe mir vier Eve Rooms gekauft. Drei funktionieren gut.
Einer hat Probleme mit der Luftqualität. Er bleibt immer bei fünf Sternen. Immer rund um 2 ppb, egal, wie schlecht die Luft ist. Reset habe ich durchgeführt, auch kalibriert. Es ändert sich nichts.
Habe von diesem Problem auch schon bei Amazon gelesen.
Was kann ich noch tun?
Gruß, Stefan

Reply
Dec 27, 2020
Nikita
Hello Eve Team,
Could you please advise if there is any way to calibrate Eve Room temperature and humidity sensor?
When I compare measurements to reverence device I see some constant offset.
Regards,
Nikita
Reply
Dec 18, 2020
Hello Nikita! There should be no difference, Accuracy typical ± 0.3°C / ± 0.54°F, typical ± 3% humidity. What is the accessory you compare to? Best regards, Volker
Reply
Dec 19, 2020
Thank you for your answer.
If the accuracy 0.3°C and 3% then it's within tolerance.
Compared to Bosch Room Thermostat, tado temperature sensor and classical fluid thermometer.
Nevertheless it would be nice to have such option.
Regards, Nikita
Reply
Dec 31, 2020
Ajouter un nouveau commentaire