All features of Eve Water Guard
A flood isn’t the only thing that causes water damage – those constant drips, trickles and puddles are often signs that damage is being done and disaster’s about to strike. This is why Eve Water Guard uses a sensing cable to monitor every critical nook and cranny of your home. You can also extend it to suit and lay it any which way you want.
So, if the worst happens and any part of the sensing cable gets wet, the siren on Eve Water Guard will go off, the accessory will flash red and, thanks to HomeKit’s special support for sensors, a notification will be displayed on your iPhone (if you’ve got a home hub). This makes Eve Water Guard an unparalleled water leak detector in terms of its full range of functions, wide-area monitoring and the reassuring feeling it offers.
Read on to learn more about what functions Eve Water Guard has and how you can use this accessory.
Siren, flashing light and text message alert
As soon as water penetrates the sensing cable’s braiding, the 100 dB siren on Eve Water Guard will sound and the LEDs on the rear of the accessory will flash red to serve as an additional visual alert. The red LEDs will continue to flash for as long as water is detected, but you can mute the siren via the Eve app – which is a breeze to do as the option pops up the moment you launch the app, provided of course a leak has been detected.
HomeKit or the home hub (HomePod, HomePod mini or Apple TV) will also provide a key additional alert in the form of a notification if the alarm gets triggered. This means you can have notifications sent to your iPhone so you’ll never have to be greeted by the worrying sight of water leaking everywhere should you be away from the source of the leak at the time or out of earshot of the siren.
All you have to do is make sure you’ve set up your HomeKit hardware correctly in the Home app: Go to the Home or Rooms view. Now use a 3D Touch or Haptic Touch gesture on the Eve Water Guard icon and then tap the gear icon in the detail view. Tap Status and Notifications, then activate Notifications on This iPhone.
Sensing cable, placement and testing
Thanks to electronic wizardry, Eve Water Guard knows the instant the sensing cable gets wet (for the techies out there: Eve Water Guard uses a resistive sensor whereby the ohmic resistance is changed if water penetrates the cable). Thanks to this principle, you can extend the sensing cable to an incredible 150 meters using the two-meter extension cables – enabling Eve Water Guard to monitor every nook and cranny of even the largest rooms or spaces, and not just the area directly beneath the wall outlet.
Hooking up the sensing cable to the base unit as well as connecting each section of cable couldn’t be easier either thanks to the 3.5 mm jack plug connectors, which ensure everything connects together securely and reliably for total peace of mind.
You can also lay the cable any which way you want: Lay it in a circle to monitor your washing machine, clothes dryer, pumps and other free-standing appliances; loop it under your sink; or run it along the wall parallel to your basement windows. Once you’ve laid the sensing cable and added Eve Water Guard to your HomeKit home, the next step is to test the alarm.
You can test the alarm standing near the base unit without fear of your ears being blown off as the siren will ring out at a softer level.
To get started, open the Eve app and tap Settings > Accessories > Eve Water Guard > Alarm Test > Start Alarm Test. You will then see a notification saying that HomeKit will consider the test alarm to have been triggered by an actual leak and so will send notifications to all connected and invited people. As such, be sure to pre-warn everyone that you’re about to run a test, then tap Continue.
You now have a three-minute window in which to wet the sensing cable to check the acoustic and visual alarms as well as the HomeKit notification function. If necessary, turn off Wi-Fi and Bluetooth on your iPhone. This will enable you to check your home hub is working correctly and ensure you receive notifications even when you’re not at home.
Now simply plunge part of the sensing cable into a bowl of water.
The alarm will now go off: You’ll hear the siren; you’ll see the base unit flash red; and you’ll be notified by the Eve app and receive a HomeKit notification on your iPhone. Tap Done and the Eve app will end the procedure and log that you have completed the alarm test successfully. You can view the log by tapping the list icon in the detail view of Eve Water Guard.
By default, the Eve app will prompt you to retest the alarm every three months. However, you can customize this interval and opt to be notified every 30 days, 3 months, 6 months or annually.
No bridge or starter set required.
Eve Water Guard works right out of the box, eliminating the need for additional accessories. You’ll need a home hub (HomePod, HomePod mini or Apple TV) to receive notifications and run automations.
Increase the reach of your devices
Add HomePod mini or the new Apple TV 4K to your home and your latest-generation Thread-enabled Eve Water Guard will be able to communicate via Thread – the mesh network that reaches even the farthest corners of your abode. This happens automatically without you needing to configure anything. Full Thread Devices (FTDs), such as Eve Water Guard or Eve Energy, can act as a router node and relay data packets from other Thread devices.
To view the structure of your Thread network and see where you can make improvements, simply go to the Settings area of the Eve app and tap Thread Network. Among other things, you’ll be able to tell which nodes your Thread devices use to communicate and whether you can further improve the stability and reach of your network and devices by adding one more FTD or moving one to a better location.
100% privacy
Eve accessories are designed to safeguard your personal data. All data is fully encrypted and only transferred directly between the Eve accessory and iPhone, iPad or home hub. Strong encryption verification during each connection attempt makes sure that only you hold the key to your home. Learn more
Learn here how to install Eve Water Guard
Requires iPhone or iPad with the latest version of iOS/iPadOS, notifications away from home require a home hub
Requires iOS/iPadOS 16.4 (or later) / Android™ 8.1 (or later), Matter controller / Thread Border Router
Posts you might also be interested in.
Five places where Eve Water Guard adds a watertight layer of protection
We’ve identified five potential problem areas where you should use Eve Water Guard to protect your home.
All features of Eve Thermo
The multi award-winning Eve Thermo smart radiator valve is quick and easy to install and set up. And with a bit of fine-tuning, it can unleash all the convenience that connected heating has to offer. Read on for a detailed overview of all the functions Eve Thermo offers.
Schedules: Automate your lighting, heating and more
Eve Energy, Eve Energy Strip, Eve Thermo, Eve Aqua and now Eve Light Switch – many Eve accessories support autonomous schedules.
- Reply
Hallo, ich suche eine Möglichkeit, unseren Abwassersumpf zu überwachen.Eine Steckdose wäre vorhanden, das Problem ist aber, dass dieser Sumpf eine hohe Luftfeuchtigkeit hat, da die Wände aus Beton bestehen.
Würden die Sensor Kabel (ich würde eine Erweiterung kaufen wollen) auch auf sehr hohe, Luftfeuchtigkeit reagieren oder tatsächlich nur auf Wasser?
Freundliche Grüße, Thomas
- Reply
Hallo Thomas! Das wird vermutlich nicht klappen bei hoher Luftfeuchtigkeit, sorry. Viele Grüße, Volker- Reply
Hallo,in unserem Haus (Keller/EG/OG) habe ich im Keller zwei Water Guards installiert. Der Border Router ist ein
Apple TV4K 2.Generation und befindet sich im OG. Im Eve App unter ThreadNetwork sehe ich die Water Guards,
aber es gibt keine Alarmierung am iPhone wenn ich einen "Alarm Test" mache. Ich habe über die drei Geschosse
vier EVE Energys in Betrieb. In den Accessories werden alle Geräte angezeigt. Warum funktioniert die Alarmierung nicht?
- Reply
Hallo Gino! Beim Test-Alarm gibt es nie Mitteilungen, nur bei einem echten Alarm. Viele Grüße, Volker- Reply
HiI'm thinking of using this to monitor an external manhole outside of a basement for potential backflow / flooding. Can I use a standard audio phono extension cable to reach the manhole (therefore avoiding false alarms from rainfall) and coil and fix the white detection cable inside the manhole, above the usual water level?
- Reply
Hi Anthony! Several customers use audio cables for this purpose, no problem. Best regards, Volker- Reply
Hallo, Mein water guard meldet immer wieder Wasser, obwohl kein Wasser am Kabel ist.Wieso kommt es dazu? Ich kann mich nicht auf den water guard verlassen.
Auch ein Abstecken und wieder anstecken hat keine Änderung gebracht.
Bitte um Hilfe.
- Reply
Hallo Roland! Bitte öffnen Sie ein Ticket in unserem Support-System:https://www.evehome.com/de/support/ticket
Vielen Dank, Volker
- Reply
I ran the test for my new eve water guard. How do I remove the alert from my apple home kit summary and from my eve ap. Neither returned to normal status after the test. Also not having a ground plug seems to limit units ability to be plugged into my outlet that is in the sink area. Disposal with ground works fine, Eve does not- Reply
Hello Jay! please open a ticket in our support systen:https://www.evehome.com/en/support/ticket
Best regards, Volker
- Reply
Hallo, ich habe einen Water Guard neu installiert mit Apple TV4K als Steuerzentrale. In der Eve App funktioniert aber der Testalarm nicht: immer, wenn ich den Test-Alarm anklicken will (rechts steht dabei "niemals"??), stürzt die App ab.Was mache ich noch falsch?
LG, Volker
- Reply
Hallo Volker! Das ist ein Fehler (Bug) in der aktuellen Version der App Eve, wir entschuldigen uns. Im Laufe der Woche werden wir ein Update veröffentlichen, das das Problem behebt. Viele Grüße, Volker- Reply
Kann der Sensor auch umgekehrt genutzt werden? Das heißt ich hänge ihn bspw. in ein Regenfass und sobald der Sensor kein Wasser mehr detektiert triggert er eine Meldung?- Reply
Hallo Martin! Das geht leider nicht, sorry. Viele Grüße, Volker- Reply
Liebes Eve-Team,ich habe bereits einen Eve Water Guard gekauft und getestet. An sich bin ich mit dem Konzept hoch zufrieden (das Sensor-Kabel ist genial) und würde gerne 2 weitere Geräte einsetzen. Allerdings stehe ich vor dem selben Problem wie meine Vorredner: Der akustische Alarm müsste dauerhaft deaktiviert werden können, sonst riskiere ich die Verärgerung meiner Nachbarn und einen Einbruch durch die Feuerwehr in meine Wohnung. Der akustische Alarm ist meiner Meinung nach sowieso bestenfalls optional, da die Benachrichtigung über ein Leck ja sofort auf mein iPhone erfolgt. Der Vergleich mit einem Rauchmelder ist hier nicht stimmig, da es sich bei einem Rauchmelder um eine lebensrettende Einrichtung handelt, bei der der akustische Alarm niemals deaktiviert werden darf. Dies ist bei einem Wassermelder aber nicht der Fall. Der Benutzer sollte selbst entscheiden können, wie er benachrichtigt wird. Ich kenne das so von allen anderen Herstellern, die ich über die Jahre im Einsatz hatte. Ich bitte Sie nun, die Firmware und die App so zu erweitern, dass der akustische Alarm dauerhaft deaktiviert werden kann. Dann werde ich gerne insgesamt 3 Eve Water Guard einsetzen. Sollte dies nicht möglich sein, muss ich leider auf andere Hersteller ausweichen, was mir sehr leid täte, da ich bereits fast die gesamte Eve-Produktpalette im Einsatz habe und mit der Hard- und Softwarequalität und dem Design äußerst zufrieden bin. Das ist das hohe Niveau, das ich seit über 20 Jahren im Einsatz von Elgato-Produkten zu schätzen weiß!!!
Besten Dank an das Eve-Team und viele Grüße,
Chris
- Reply
Hallo Chris, die Aussage bleibt bestehen für Eve Smoke und Eve Water Guard, sorry. Schönen Sonntag!- Reply
Great device!A few suggestions:
- Good if the siren/sound could be disabled.
- Also, by default, it would be good if the alarm started on the not-so-loud sound level, and stayed there for ~3 minutes, before increasing in sound level. That way, all the false alarms would be less painful. Would still also want the ability to disable the siren altogether.
- As SEO work, and as usefulness to your customers, you should ask people to send in their stories, along with pictures, and info on what they've cooked up. For example, I connected Y to X, and setup a scene that does ABC. You'd then post the good ones on your website, both as inspiration, and by using customers own words (at least partly), you'd get a lot of SEO content and more traffic.
Regards,
Alexander
- Reply
Hallo, habe den Water Guard angeschlossen und er funktioniert auch. Der Testalarm war erfolgreich und ich habe eine Benachrichtigung auf meinem IPhone erhalten.Meine Frage ist nun, wie kann ich eine Benachrichtigung auf meinem AppleTV anzeigen lassen wie auf dem Phone falls Wasser austritt.
Ggf. schaue ich gerade TV und das IPhone liegt nicht in der Nähe und der Alarm ist auch nicht zu hören.
Danke im Voraus.
Viele Grüße
- Reply
Hallo Heiner! Der 'richtige' Alarm ist extrem laut, den hören Sie auch beim Fernsehen. Am Apple TV 4K lassen sich Benachrichtigungen von Kameras mit HomeKit Secure Video einblenden, keine vom Eve water Guard. Viele Grüße, Volker- Reply
Mehrere Stecker in einzelnen Plastiktütchen, die noch mal zusammen in einem Plastiktütchen stecken. Warum sind die Gebrauchsanweisungen nicht in Plastiktütchen?- Reply
Hallo Stefan! Ich reiche Ihre Kritik an die zuständigen Kollegen weiter. Vielen Dank, Volker- Reply
Hi - Can the siren be completely switched off (so that alerts only come via the app) as I intend to use it in my kids room? Also would the alert only be via an app message or could also be a call? Thank you!- Reply
Hello Eva! Unfortunately it is not possible to disable the audio alarm on Eve Water Guard, sorry. Best regards, Volker- Reply
This is no-go for me - I don’t want any loud audio, as the cable will randomly get wet by accidents in bathroom. I just need notification on phone. Does the new version with thread support turning audio off?- Reply
Hello Vit! The audio alarm can't be turned of, same with out smoke/fire detector - for a good reason. This is not possible on the Thread enabled version as well, sorry. Best regards, Volker- Reply
Unfortunately this is a deal breaker, and from my point of view a bad product decision. I live in an apartment and loud alarm is not welcomed and definitely annoying for all my neighbors. And I expect most of people living in apartments don’t want loud siren due to neighbors and want instead smart capabilities like notification or alarm on phone, not device.- Reply
Can you the Eve Guard be used in the opposite way? For example, keep it in a water tank and use an automation to automatically fill the tank once Eve Guard detects a dry environment?- Reply
Hello! No, this is not possible, sorry. The trigger is the detection of water by the sensor cable, it does not work the other way round. Best regards, Volker- Reply
Hallo. Der WaterGuard lässt sich nicht mit dem Eve Extend verbinden - der Vorgang kann zwar gestartet werden, bleibt bei „Gerät zuordnen“ (ganz unten steht klein „von HomeKit entfernen“) hängen. Ich habe das dann nach 5 Minuten abgebrochen. Dann ist der Wateguard nicht mehr in HomeKit eingebunden. Wenn ich ihn dort neu hinzufügee, klappt das. Aber wenn ich ihn mit dem Extend verbinden will, hängt es wieder und geht nicht vorwärts. Was kann man hier tun?- Reply
Hallo C! Bitte nutzen Sie zum Verbinden des Eve Water Guard mit einem Eve Extend das iPhone/iPad des 'Hauseigentümers' und nicht ein iOS-Gerät, das Gast an dem Zuhause ist - auch mit allen Rechten.Viele Grüße, Volker
- Reply
Hello, will be be possible to use the sensor cable for an outdoor area? I have my water tank on the roof top where it’s difficult to monitor any water leak. Was thinking to run your sensor cable all the way from roof top to inside the house. Distance might be 20 to 30 meter.- Reply
Hello Sadiq Al Lawati! In theory, yes. But keep in mind when putting the sensor cable outside even rain may trigger the alarm. Best regards, Volker- Reply
Is Tread support in the planning for the Water Guard?What date Tread support has ben planned has been planned?
- Reply
Hello Abraham! The current generation of Eve Water Guard is not ready for Thread. We will be releasing new hardware generations of many Eve devices with Thread support later this year, but unfortunately can't give any further details on when this will be the case for Eve Water Guard at this time.Here's a list of all the currently available Thread-enabled Eve accessories:
https://www.evehome.com/de/identify-your-eve-accessory
- Reply
I'm a bit sad that I just purchased 2 Eve Water Guards when it seems like thread enabled ones are imminent. Any possibility that existing customer will be offered discounts if the new ones come out within a year of purchase?Also, I would love to see an Eve Water Guard that runs on batteries. I don't have an outlet near my water heater and I would love to use Eve Water Guard vs a competitor. Thanks!
- Reply
Hello Hope! The current generation of Eve Water Guard is not ready for Thread. We will be releasing new hardware generations of many Eve devices with Thread support later this year, but unfortunately can't give any further details on when this will be the case for Eve WaterGuard at this time.Here's a list of all the currently available Thread-enabled Eve accessories:
https://www.evehome.com/de/identify-your-eve-accessory
There won't be any discounts, sorry. The next model will be powered as well, not running on batteries. Have a great Sunday, Volker
- Reply
An der Stelle wo ich messen möchte habe ich keine Steckdose, kann man das Gerät auch mit einem Adapter via Batterie betreiben?- Reply
Hallo Steve! Nein, das geht leider nicht. Viele Grüße, Volker- Reply
I added Ever Water Guard to Homekit , but just can't include it in Home Status tile.Please help !
Thanks .
- Reply
Hello! Apple changed it how alarm accessories show up in the app Home with iOS 14.2. You'll find it in it's room in the row on top in a circle. This was Apples decision and applies to all alarm sensors from all vendors. Best regards, Volker- Reply
Hello Bruce! Apple changed this in Home with iOS 14.2. In Home open the room Eve Water Guard is mounted it and look for a circle alarm tile on the top. Now way anymore to see alarm sensors or contact sensors or even those with temperature as a tile we know. Nothing we can do about, please complain with Apple here. Best regards, Volker- Reply
Ist es möglich den Eve Smoke mit dem Eve Water Guard zu kombinieren so das der Alarm bei beiden auslöst so bald einer der beiden Geräte eine Gefahr erkennt? Bsp. Eve Smoke im Schlafzimmer 2. Stock und Eve Water Guard in der Garage -1. Stock, denn bei diesem Setup würde ich nachts nur den Eve Smoke hören und leider den Eve Water Guard nicht. Ist für mich relevant da ich in einem Hochwassergebiet leben.LG Tim
- Reply
Hallo Tim!Das geht leider nicht, es geht sehr zulasten der Batterie im Eve Smoke. Sie können aber eine Sirene 'bauen' und nutzen, siehe auch: https://www.evehome.com/de/blog/homekit-sirene-fuer-mehr-sicherheit
Viele Grüße, Volker
- Reply
Hallo, ich will den Watergate gerne in meinem Haus im Keller und in der Küche installieren. Um im Falle eines Alarms auch unterwegs informiert zu werden, brauche ich ja ein HomePod oder AppleTV. Ich müsste mir so etwas noch zulegen. Wie nah müssen die Watergates am HomePod sein, damit es einwandfrei funktioniert? Geht das auch über zwei Stockwerke?Vielen Dank
Gruß Sven
- Reply
Hallo Sven! Für Benachrichtigungen unterwegs aller HomeKit-fähigen Geräte aller Hersteller ist immer eine Steuerzentrale von Apple vorgeschrieben. Wir empfehlen ein Apple TV 4/4K, einen HomePod oder den neuen HomePod mini. Ist die Steuerzentrale im Geschoss der Küche aufgebaut, sorgt sie dafür, dass das Eve Water Guard dort abgedeckt ist. Zwei Stockwerke tiefer wird Eve Water Guard nicht erreicht, hier würde ich ein Eve Extend (https://www.evehome.com/de/eve-extend) aufbauen, um das Gerät einzubinden. Das Eve Extend verbindet sich per Bluetooth mit Eve Waterguard im Keller und anderen Eve Geräten dort und sendet das Signal über Ihr WLAN weiter an das iPhone/iPad und die Steuerzentrale. Viele Grüße, Volker- Reply
I would like to propose this product to our 6 story , 36 condo association. Beach condo , so residents are sporadic. Sensor would be great to set in the closet which houses both the air conditioner unit which sits above the water heater.This could work wonders IF our security service could be the one notified whenever any of the 36 sensors goes off.
Is that a possibility ?
ATL
- Reply
Hello Albert!Notifications in HomeKit are only sent to the iOS device, that "owns" the accessory or is a guest to the owner. So yes, would be possible in theory but the security service would need an iOS device or a Mac.
And it may be a challenge to get them all connected.
This is not a topic for the blog, you may want to contact me direct at [email protected]
Best regards, Volker
- Reply
Hello,Say I have a Home Hub.
1) Is it possible to use the Eve Water Guard as trigger directly from the Home Hub?
2) When using it as a trigger in an automation setup from the Eve app, will this automation appear and be editable within Home Hub?
3) Is it possible to get notified without setting off the alarm?
- Reply
Hello Hymced!For receiving any notification while on the road a home hub is mandatory. We recommend using an Apple TV 4/4K or HomePod.
Automations are created in Home or Eve and then transferred and executed on the home hub. Detecting Leak from Eve Water Guard can be a trigger for like turning on lights, turning off power in a scene. Either create an automation/rule in Eve or in Home, please don't mix in one automation but you may use both apps.
You'll get notified (alarm) once a leak is detected. Please check more on:
https://help.evehome.com/hc/en-us/articles/360014746239-Alarms-and-muting-alarms
You may turn off the alarm in the app Eve only, not in Home from Apple.
Best, volker
- Reply
Thank you for the details. I have read the article you pointed out, but I want to clarify how "notification" and "alarm" works. You say: "You'll get notified (alarm) once a leak is detected". As I understand it, once the Eve Water Guard is activated / in detection mode, the 100 dB siren will trigger upon detection, and a *regular iOS* notification is send (which you call "alarm"). Am I getting that correctly? Do you have pictures to illustrate that please? Is this alarm notification setup automatically or one must create an automation whose action will be sending a notification upon detection? You also say: "Detecting Leak from Eve Water Guard can be a trigger for like turning on lights, turning off power in a scene". And what about sending a notification? Is it possible to automate the action "send a notification to someone" upon detection?There is a underlaying big question I am trying to solve. Here it goes: I live in a apartment, and I fear that if a 100 dB siren sounds, if, for some reason, I am not able to mute it via the Eve app rapidly, neighbors could easily after sometime call the firemen. And they could break down my expansive door just to shut it down... Whereas if I had been able to setup a notification without triggering the siren, I could have asked someone with my keys to check what's happening inside...