All features of Eve Thermo
The multi award-winning Eve Thermo smart radiator valve is quick and easy to install and set up. And with a bit of fine-tuning, it can unleash all the convenience that connected heating has to offer. Read on for a detailed overview of all the functions Eve Thermo offers.
Now supports Thread
The fourth generation of Eve Thermo, which is available since autumn 2020, now also supports Thread along with Bluetooth. Eve Thermo joins your Thread network automatically, which makes your smart home network more responsive and robust, plus it increases its reach.
Thread accessories don’t need a proprietary bridge to communicate with each other – they simply need a Border Router, which for HomeKit over Thread is HomePod mini or the new Apple TV 4K. Battery-operated Thread accessories, such as Eve Thermo, represent endpoints in your Thread network. Discover all you need to know about HomeKit over Thread here.
You can add Thread support to your latest-generation Eve Thermo simply by updating the accessory’s firmware. Discover if your Eve Thermo can support Thread by visiting evehome.com/identify. Installing the firmware is simply a matter of opening the Eve app and tapping Accessories > [Eve Thermo].
Heating via an app, touch controls and Siri
You can control your heating using the Eve and Home apps or simply ask Siri to make your room warmer, set it at a specific temperature or stop heating.
Siri control
- for your whole home: "Hey Siri, set the temperature to 21 degrees."
- room by room: "Hey Siri, set the bathroom to 23 degrees."
- within a zone: "Hey Siri, set the temperature in the first floor to 21 degrees."
- as part of a scene: "Hey Siri, good night!"
Plus, you also enjoy granular control of your heating in increments of 0.5°C on the smart radiator valve itself.
Scheduled heating designed around you
Eve Thermo is built around schedules, which are a really simple and effective way to control your Eve accessories. They’re also a breeze to create using the Eve app – and once you’ve done that, they’re stored automatically on your Eve Thermo so your accessory can set about controlling your heating completely autonomously and all independently of your iPhone and an internet connection.
Each room in your home requires a different temperature, and even that temperature should change to suit the time of day: You want it nice and warm in your bathroom early in the morning, followed by your living room a little later on as well as in the evening. Your bedroom should be set to a constant 17 degrees. Plus, you may also want to take into account that you like to doze under the duvet for that bit longer on Sundays and that the kids arrive home earlier on Thursdays. Sounds complicated, right? Well, using schedules means you’ll get everything fine-tuned to suit your routine in a flash.
You can create a custom schedule for each room in the Eve app, plus you can set the comfort and economy temperature for the room in question. You can then configure the various schedules for workdays and the weekend, or individually for each day – or even for all days. Each schedule offers 3 heating phases such as mornings, afternoons, and evenings.
The "Days Off Calendar" function accesses a calendar chosen by you on your iPhone (such as "Holidays") and ensures that the weekend schedule is run on days which are public holidays – all without you having to lift a single finger.
By the way: Even if a schedule is active, you can still adjust it via the app, Siri or manually on the accessory itself. This setting is then changed with the next scheduled temperature change.
Heating depending on if you’re leaving or arriving at home
Life doesn’t always go exactly according to plan, so to cover all of life’s little eventualities you’re best off controlling your heating using a combination of schedules and location control. At all times, you remain in full control, and your privacy continues to be protected to the highest standards.
To control your heating based on location, you need a home hub (HomePod mini, HomePod or Apple TV). This enables HomeKit to determine if everyone has left home without anyone’s location constantly being tracked, recorded, or possibly even shared. Since only the technology baked into iOS is used for this function, it saves your iPhone’s battery and also ensures a profile of your movements cannot be created – not by Eve, by Apple, nor by any other unscrupulous individual who may have gotten hold of your information through a data leak. Your and your family members’ location is always determined based on the particular device set under "Find My" in the Apple ID settings.
Location-based heating is a breeze to set up for Eve Thermo in the Automation area of the Eve app. Go to Rooms, choose Eve Thermo and Automation. There you can also choose whether to suspend schedules when nobody is home. You can also set the temperature you want maintained while your home is vacant.
When you turn on this option, the schedule will only be resumed once the first family member arrives home – meaning that when nobody’s home, your set temperature will be maintained to prevent your home cooling down too much.
If you choose not to suspend schedules, the temperature will be lowered as soon as the last person leaves home. However, the next heating phase will still be activated even if your home is vacant. This way you can be sure that your heating will be lowered even if everyone leaves home earlier than usual, yet you will still return home to a nice warm place that’s been pre-heated for you.
If you don’t want to use any schedules, you can rely exclusively on controlling your heating based on the location of all family members. With this, your heating will spring into action as soon as anyone arrives home – perfect if the room heats up again quickly or you don’t need it to be at your desired temperature immediately when you get home.
Eve Thermo in the Eve app
You can dive into Eve Thermo’s details view either by tapping the Rooms view in the Eve app or by long-pressing (or using 3D touch, if your device supports it) the particular accessory’s icon in the At a Glance view. Besides the accessory settings, the details view is the main dialog for controlling your smart radiator valve. It is divided into the General section, Target Temperature, Mode and Schedule.
General:
Tapping the small arrow on the right opens the advanced view, which includes a battery status indicator, an accessory settings icon and the identify button, which when tapped will display a “Hi” on the Eve Thermo in question. The latter is handy if you own several smart radiator valves and you want to make sure you’re in front of the right accessory when changing the batteries.
Target Temperature:
The central field of the detail view shows the current target temperature, which is the room temperature you want Eve Thermo to reach. Use the up/down buttons to adjust this value in 0.5 °C increments.
The measured temperature currently measured by the accessory can be seen on the left above the graph in the form of a thermometer/heater icon. HomeKit treats the sensor in question just like a stand-alone temperature sensor or that of a wall-mounted thermostat or air conditioner. Siri and the display in the Home and Eve apps display this value as measured. Any configured temperature offset (see below) is not included in the calculation by the accessory or app. Discrepancies between the actual and target temperature during heating are normal, as factors such as the sensor being located on the radiator instead of in the center of the room (and also the configured temperature offset), the 10-minute measurement interval and the smart radiator valve’s control algorithm play a role here. If, for instance, you want to heat up a room again that has cooled down, the temperature measured at the radiator’s fully-opened valve will initially be significantly higher than the target and actual room temperature – and don’t forget that the same temperature will be displayed for 10 minutes until it’s refreshed.
A yellow radiator icon will also be displayed above the graph when Eve Thermo is currently heating. You will see a stopwatch next to the target temperature button when a schedule is active (any manual setting will only last until this particular schedule is due to start again).
The graph will show a timeline with the progressions for the measured (gray) and target temperatures (blue). Daily highs and lows as well as the last measured temperature will be marked with dots. Tapping the small info icon will allow you to view the graph by hour, week or month. Additionally, you can stop the target temperature from being displayed in the graph, deactivate Graph Line Smoothing and access temperature readings in the list view.
Mode:
The Mode section lets you disable Eve Thermo’s heating function. The mode returns to On if you enter anything via the accessory’s touch controls or use Siri, automations or the Home app to trigger changes. However, please note that even when in the Off mode, valve descaling cycles, and a certain amount of noise in connection with that, will continue. The temperature will also continue to be measured. If radiator valves are grouped, switching off one accessory will not affect the others.
Schedule:
The current schedule stored on the accessory is displayed in the bottom-most section. It can be deactivated permanently via the On/Off button – and will stay deactivated even after the next heating phase is reached. Tapping the gear icon will take you to the schedule section with the schedules contained in the Eve app and those added by you. You’ll find an info icon next to the latter, which you can tap to bring up the schedule editor.
Settings
You’ll find all the key functions, some of which you’ll have already seen during the initial setup, in the settings for Eve Thermo (Eve > Settings > [Room] > [Eve Thermo]). Starting from the top.
Room: This is where you’ll find the room you assigned your Eve Thermo to during installation. You can change it at any time.
Name: This is the Siri name you set during the initial setup. Although entirely optional, a meaningful Siri name such as “Living Room Heating” can make controlling Eve Thermo with your voice a lot easier.
Installation: Here you can see if Eve Thermo has been installed correctly (OK). If you want to use your accessory on a different radiator in your home, but want to keep the data, tap Installation > Remove. You can now remove Eve Thermo and calibrate it at its new location. If you ended up installing the display upside down, you can change its orientation here.
Temperature Offset: As Eve Thermo connects right next to the radiator, which is often located under a windowsill, the values measured may deviate from the actual temperature in the center of the room. To compensate, you can configure a temperature offset which Eve Thermo factors in when controlling the valve. If the room temperature is lower than the measured temperature shown in the app, set the temperature offset to a negative value. For example, if your lounge is 20 °C, but Eve Thermo reports 21.5 °C, set the temperature offset to -1.5 °C. Over time, you’ll need to work towards finding the ideal temperature offset that works for the particular room.
Window Detection: If you use Eve Door & Window on a window in the room where you’re also using Eve Thermo, Eve can automatically stop heating if the window is opened for ventilation purposes. It then resumes heating once the window is shut. This type of automation requires Apple TV or a HomePod as a home hub.
Window Detection is smart: If you forget to shut the window, heating resumes automatically after 30 minutes to prevent the building from cooling down. However, you can adjust this value to suit.
Eve Thermo detects rapid drops in temperature even without a wireless contact sensor, however it’s less precise than when used in conjunction with Eve Door & Window. In this mode Eve Thermo continues to heat again after 10 minutes.
Vacation Mode: About to take a long vacation? To avoid having to adjust each radiator individually or add a different schedule, you can simply activate Vacation Mode. It’ll suspend your schedules, hold the energy-saving temperature you’ve set and prevent your home from freezing up. Here you can set whether the Eve Thermo in question should be part of the vacation scene and the temperature you want maintained. Once you’re back from vacation, simply activate the Back from Vacation scene and everything will return to normal. .
Valve Protection: Eve Thermo will open the valve fully every three weeks to prevent scale buildup. If you trigger this function manually, Eve Thermo will remember when you did so and resume automatic valve protection three weeks from that time of the day.
Temperature Unit: Choose between Celsius and Fahrenheit.
Child Lock: To prevent unwanted temperature adjustments, activate Child Lock to disable the touch controls of Eve Thermo.
ID: Tapping ID will display Hi on the Eve Thermo in question. It’s really handy if you want to identify a particular Eve Thermo accessory.
Remove Accessory: This command lets you remove a particular Eve Thermo accessory from your HomeKit configuration. You may want to do this if you intend to relocate your accessory to a different home.
Assigned to (optional): If you have assigned Eve Thermo to an Eve Extend range extender, it will also appear here in the settings.
No bridge or starter set required.
Eve Thermo works right out of the box, eliminating the need for additional accessories. Schedules are stored directly on the accessory itself, so they’re always executed without the involvement of any other devices. For automations (such as heating based on if you’re at home or away, or window detection in conjunction with Eve Door & Window), you’ll need a HomePod, HomePod mini or Apple TV as a home hub.
Increase the reach of your devices
With a HomePod mini or the new Apple TV 4K in your home, your latest-generation Thread-enabled Eve Thermo can communicate over the Thread mesh network, reaching even the farthest corners of your abode. This happens automatically without you needing to configure anything. A Full Thread Device, such as Eve Energy, Eve Light Switch or Eve Water Guard, can act as a router node and relay data packets from other Thread products, such as Eve Thermo.
To view the structure of your Thread network and see where you can make improvements, simply go to the Settings area of the Eve app and tap Thread Network. Among other things, you’ll be able to tell which nodes your Thread devices use to communicate and whether you can further improve the stability and reach of your network and devices by adding one more Full Thread Device or moving one to a better location.
Requires iOS/iPadOS 16.4 (or later) / Android™ 8.1 (or later), Matter controller / Thread Border Router
Posts you might also be interested in.
Schedules & location control: Smart heating with Eve Thermo
Enjoy a cozy home when you’re there, and save energy when you’re not – that's smart heating, courtesy of Eve Thermo. Now it’s easier than ever to combine the sheer convenience of schedules with location-based heating. Read on to learn how to enjoy all these great benefits.
Eve Thermo receives Ecodesign Award
On November 25, 2019, Eve Systems received the Ecodesign Award, Germany’s most renowned award for ecological design, at an awards ceremony held at the German Federal Ministry for the Environment, Nature Conservation and Nuclear Safety.
Even penguins enjoy keeping cozy thanks to smart heating in the kindergarten
A parent-run initiative like ours consumes a great deal of time and effort, plus we need to keep a constant eye on our operating costs. However, as we don’t just want to save money, but also lighten the load on our staff and the environment, we’ve recently started using smart radiator valves to intelligently control the indoor temperature. In this post we share the lessons we’ve learned.
- Reply
BonjourJ'ai une pompe à chaleur qui alimente 12 radiateurs en fonte que j'ai équipés intégralement avec des valves EVE Thermo.
1 - Je ne sais pas comment utiliser mon thermostat de PAC. Sert-il encore à quelque chose ?
2 - Si oui, dois-je laisser la programmation depuis le thermostat sur ON au maximum de la température et ajuster avec les valves connectées pour programmer une température intérieure ?
3 - On me dit de laisser au moins un des radiateurs toujours allumé pour ne pas que ma PAC tourne à vide si mes valves sont éteintes. Qu'en dites-vous ?
Merci d'avance pour vos réponses
- Reply
Och ne, nach dem Update auf Matter, ist der Zeitplan nicht mehr aktivierbar.So ist es nicht mehr möglich, die Temperatur zur Nacht zu einer bestimmten Zeit zu senken und am
Morgen wieder zu erhöhen. Schade.
- Reply
Hallo Mike!Für Zeitplan wird der Standort in Eve benötigt. Bitte öffnen Sie die App Eve und gehen zu
Einstellungen > Allgemein > Standort
und setzen den.
Viele Grüße, Volker
- Reply
Hallo, ich habe ein neues Iphone und dieses mit meinem alten Iphone eingerichtet. In der Eve App findet diese jetzt die Thermostate nicht mehr. Muss ich die Thermostate aus der App löschen und neu hinzufügen?- Reply
Hallo Joerg!Bitte setzen Sie das neue iPhone aus dem Backup des alten auf, nur dann sind alle Daten vorhanden.
Viele Grüße, Volker
- Reply
Ich habe meine Eve Thermos über Thread eingebunden und nutze sie über die Home App am iPhone. Im Wohnzimmer habe ich zur genauen Themperaturmessung auch ein Eve Thermo Control stehen. Funktioniert super und präzise.Jetzt zu meiner Frage: In meiner Küche habe ich auch ein Eve Thermo, aber anstelle eines Eve Thermo Control einen Apple HomePod mini, der auch gleichzeitig als Homebase dient. Der HomePod mini hat auch einen Temperatursensor verbaut. Greift das Eve Thermo in der Küche nun auf den Themperatursensor vom HomePod zu, oder auf den Sensor im Eve Thermo selbst?
- Reply
Hallo Chris!Den Job kann leider nur ein Eve Thermo Control erledigen.
Viele Grüße, Volker
- Reply
Bonjour,Eve Thermo peut-il commander une prise Eve Energy par rapport à une température donnée, par exemple 22°C ?
- Reply
Bonjour. Vous pouvez utiliser des automatisations HomeKit avec un Eve Thermo et une Eve Energy.- Reply
Eve Thermo Temperature offsetHi, the offset for the temperature is the difference between room temperature and target temperature or the difference between room temperature and the temperature with the heater icon?
My problem is the target temperature is 21 degrees celsius and the heater graph shows 25 degrees but the room had already 21. But the heater is still heating.
- Reply
Hello Lukasz! After installation and calibration in the Eve app, please do the basic setting once.How to set up Eve Thermo including the Offset
Important note: The temperature displayed below Target Temperature in Eve is measured by Eve Thermo way too close to the heater, please ignore it. Once an Offset is set, it will not be integrated here.
To set up Eve Thermo open the app Eve and goto
Settings > Accessories > Eve Thermo
Set Temperature Offset to 0 degrees.
Then in Eve goto Rooms > Eve Thermo and open Eve Thermo.
Set Target Temperature to 23 degrees for example and let it heat for 2-3 hours.
Then measure the temperature in the middle of the room with a thermometer, Eve Degree or Eve Room.
If it reads for example 20,5 degrees, goto
Settings > Accessories > Eve Thermo and set the Temperature Offset to -2,5 degrees.
You may have to adjust this over the next days a bit.
As stated before, the Temperature Offset is not taken into account in the temperature shown below Target Temperature.
Once this is done, please use the schedule function for heating, please also read our blog:
https://www.evehome.com/en/blog/smart-heating-in-three-easy-steps
Best regards, Volker
- Reply
Die manuellen Dreh-Thermostate früher hatten meist neben den Stufen 1 bis 5 auch die mit Sternchen markierte Stufe, in der nur dafür gesorgt wurde, dass die Wasserleitungen nicht einfrieren. Die Eve-Thermo sollen ja auch einen Frostschutz verbaut haben. Wie aber funktioniert dieser? Woran merkt der Eve-Thermo, dass es draußen frostig ist und das Ventil auf zB. 5% geöffnet werden muss?- Reply
Hallo Andreas! Eve Thermo kommt mit einem integrierten Frostschutz, der ab 5C aktiv wird. Er lässt sich werder deaktivieren, noch aktivieren. LViele Grüße, Volker- Reply
Wann kommt das Update für den eve Thermo mit Matter Unterstützung?- Reply
Hallo Laser!Danke für Ihr Interesse an Eve Thermo Control bzw. dem Firmware-Update mit Matter-Unterstützung für Eve Thermo. Leider hat die Fertigstellung des Produktes und des Updates trotz maximaler Anstrengung unseres Teams mehr Zeit als geplant beansprucht, sodass sich der im Rahmen der IFA 2023 ankündigte Starttermin um etwa drei Wochen verschiebt. Das bedauern wir sehr und hoffen auf Ihr Verständnis.
Wie bei allen Updates von HomeKit zu Matter ist eine komplette Apple-Umgebung mit iPhone und Thread Border Router vorausgesetzt, also HomePod mini oder HomePod (2. Generation) und/oder das Apple TV 4K (2. Generation) oder Apple TV 4K (3. Generation, Wi-Fi + Ethernet).
Viele Grüße, Volker
- Reply
Hallo, sind Automationen im Thermostat gespeichert, also funktionieren die auch, wenn Strom/ Internet ausfällt? Und macht es einen Unterschied in welcher App man die Automation einrichtet (Eve oder Apple HomeKit).Danke vorab!
- Reply
Hallo Oskar! Zeitpläne sind auf dem Gerä#t gespeichert und funktionieren, Automationen nicht. Viele Grüße, Volker- Reply
Hallo, ich nutze Eve-Thermo im gesamten Haus (KG, EG, OG). Ist es möglich die Thermostate in Bereiche/Geschosse zusammenzufassen?Viele Grüße
Helmut
- Reply
Hallo helmut! Das geht leider nicht, außer in Gruppen und hier nur für Siri. Viele Grüße, Volker- Reply
Could the Eve Thermo and Thermo Controller possibly replace my current (dumb) actuators and thermo sensors in my water heated floor system (Norway)?- Reply
Hello LarsT! This may be possible if Eve Thermo can fit on the valve. But we will know more and publish it once we get closer to availability. Best regards, Volker- Reply
Hallo,wir haben die Eve Thermoheizkörperthermostate im Wohnzimmer, Bad, Kinderzimmer und Schlafzimmer mit den dazugehörigen Eve Door & Window 4er Set. Ich steuere das über mein IPhone. Wenn das Fenster offen ist, wird das auch erkannt, aber die Heizung stellt sich nicht aus. Ich dachte diese Funktion geht auch ohne Steuerung oder brauche ich dafür ein Apple HomePod Mini?
Viele Grüße
Yvonne Schuster
- Reply
Hallo Yvonne! Da es sich um eine Automation handelt, ist eine Steuerzentrale in reichweite Voraussetzung. Ein Apple TV 4/4K und/oder HomePod/mini.Viele Grüße, Volker
- Reply
Hallo Volker, beim ersten unserer Eve Thermo stand nun nach etwa 1,5 Jahren ein Batteriewechsel an. In der App unter „Einstellungen/Geräte“ wurde ein rotes Batterie-Symbol angezeigt. Und wenn man den Thermostat im dazu gehörigen Raum in der App ausgewählt hat (er ist Teil einer Gruppe von 3 Thermostaten) wurde oben, wo man auch die Einstellungen auswählen kann, „Batterie schwach“ angezeigt und „Die Batterien sind schwach. Ersetze sie bald!“. Ich habe daraufhin die alten Batterien raus genommen und gegen neue getauscht. Die Batterieanzeige zeigt nun 100%. Ist also offenbar voll. Die Anzeigen „Batterie schwach“ usw. werden aber weiterhin angezeigt. Das ist etwas verwirrend. Was kann man tun, damit die Aufforderung die Batterie zu wechseln, wieder verschwindet? Muss ich da noch irgendwas bestätigen oder zurücksetzen?- Reply
Hallo Christian! Ich würde die neuen Batterien noch einmal für eine minute entnehmen und dann wieder einlegen und dann 2-3 Minuten warten. Das sollte das Problem beheben. Viele Grüße, Volker- Reply
Hi @Volker. When I set my Eve Thermo’s to off, the valves are not closed. I can hear water noise in the heater. Calibration does not help. Only way is to remive device and Mount it without fully tighten it - then firmly tighten it aftes calibration has completed.Can this be fixed?
- Reply
Hello Michael! please open a ticket in our support systen:https://www.evehome.com/en/support/ticket
Best regards, Volker
- Reply
Hello,I have Eve Thermo and Have 2 questions:
1. During Spring and summer I haven't warm water in my heaters. How can I set my Eve on this time?
2. In Autumn always the administrations fill heating system.warm water and they set working pressure. They always inform us about setting our valves on max temperature. How can I set maximum open in Eve Thermo?
- Reply
Hello Maciej! At the end of the heating period set Mode and Schedule to Off and disable all automations like Window Detection, Vacation mode… to off a you are set. Best regards, Volker- Reply
Hi!I would love if Eve's thermostat could be based on the temperature measured by my Homepod Mini. Even with -5 degrees as my offset settings, I am still a few degrees away from what the valve estimates (17° on Homepod, 25° on the valve, connected to a large and vintage radiator). Is there any way that I can fix this?
Thank you
Nicolas
- Reply
Hello Nicolas! Unfortunately Eve Thermo can't be controlled by room thermostats or external sensors, sorry. Best regards, Volker- Reply
Hallo zusammen,ist es möglich die Eve Thermos mit einem Adapter an den Fußbodenheizung Verteiler zu montieren und zu betreiben?
Viele Grüße
Martin
- Reply
Hallo Martin! Eve Thermo ist leider für Fußbodenheizungen nicht geeignet, sorry. Viele Grüße, Volker- Reply
Wird es auch ein Produkt für Fußbodenheizung geben?- Reply
Hallo Tobias! Eve Thermo ist für Fußbodenheizungen nicht geeignet. Aktuell haben wir da keine Lösung im Angebot.Viele Grüße, Volker
- Reply
Hallo,ist es möglich, bei Abwesenheit nur eines Familienmitglieds die Temperatur eines Raumes zu senken?
(und falls ja, wo stelle ich das ein?)
Abwesenheit basiertes Absenken bei Verlassen aller Familienmitglieder ist bereits aktiviert, die obige Regel müsste zusätzlich greifen.
Gruß
Henning
- Reply
Hallo Henning! Das geht leider nicht, entweder nur Sie oder alle. Viele Grüße, Volker- Reply
Habe mehrere Eve Thermo, alles mit Homepod mini verbunden, Zeitpläne erstellt, offset auf 0; verstehe jetzt folgendes nicht: lt. Zeitplan sollte Zielwert in der Nacht 18 Grad sein, Thermos melden überall 19.5-20 Grad, dennoch heizen alle Thermos mit offenen Ventilen bei 15-20%. Wieso heizen die alle, wenn es ja eigentlich wärmer ist als es sein sollte? Ich will es ja kühler haben und die arbeiten in allen Räumen dagegen…- Reply
Hallo KCY! Bitte deaktivieren Sie die Zeitpläne und stellen Eve Thermo erst einmal grundsätzlich ein.Wichtig: Die unter Temperatur Zielwert angezeigte Temperatur in Eve ist von Eve Thermo viel zu dicht am Heizkörper gemessen, bitte ignorieren Sie den Wert. Auch wenn die Temperaturabweichung gesetzt ist, wir der Wert nicht in die Darstellung eingerechnet.
Um Eve Thermo einzustellen öffnen Sie die App Eve und gehen zu
Einstellungen > Geräte > Eve Thermo
Stellen Sie die Temperaturabweichung auf 0 Grad.
Dann öffnen Sie in Eve Räume > Eve Thermo und öffnen Eve Thermo.
Stellen Sie Temperatur Zielwert auf zum Beispiel 23 Grad und heizen für 2-3 Stunden.
Messen Sie dann die in Raummitte erreichte Temperatur mit einem Thermometer, Eve Degree oder Eve Room.
Wenn hier zum Beispiel 20,5 Grad erreicht werden, gehen Sie in Eve zu
Einstellungen > Geräte > Eve Thermo und stellen die Temperaturabweichung auf -2,5 Grad.
Es ist möglich, dass Sie den Wert über die folgenden Tage nachstellen müssen.
Wie schon gesagt, wird die gewählte Temperaturabweichung nicht in den Wert der angezeigten/gemessenen Temperatur eingerechnet.
Jetzt können Sie Zeitplan wieder aktivieren.
Viele Grüße, Volker
- Reply
Is there a valve adapter which can be used with US steam heat radiators to get European adapters to work? We have a century old building and heating system, and would love for there to be a Matter/Thread enabled temperature controller. There is a huge market for such products here.The alternative is an open source hardware group effort... 😅
- Reply
Hello Satadru! Eve Thermo does not work with steam heaters and will not, sorry. Best regards, Volker- Reply
Hallo,Ich habe für das Eve Thermo einen Zeitplan hinterlegt. Wie kann ich den Zeitplan wieder aktivieren, wenn ich ich die Temperatur manuell geändert habe? Warten bis der Zeitplan (mit der nächsten Temperaturschaltung) wieder greift möchte ich nicht.
- Reply
Hallo Paul! Wenn Sie nicht warten wollen bis zum nächsten geplanten Wechsel im Zeitplan, können Sie eine andere gewünschte Zieltemperatur wählen oder Zeitplan deaktivieren. Viele Grüße, Volker- Reply
HiI wish to replace the thermostatic radiator valve one of my existing radiator which is fitted in the horizontal plane, rather than vertical – will the Eve Thermo Smart radiator valve work in the horizontal plane?
Chris
- Reply
Hello Christopher! This is no problem. You can even flip the display in the app Eve in settings. Best regards, Volker- Reply
My valves keep losing its data with a note ‘the read/write operation failed’- Reply
Hello Paul! This is a range problem, please open a ticket in our support systems: https://www.evehome.com/en/support/ticketThank you very much, Volker
- Reply
Why is the minimum temperature 10 degrees centigrade on the Eve Thermo? I want to sometimes just have frost protection in some rooms e.g. 4 or 5 degrees.- Reply
Hello Ray! The frost protection is active always at 4C. It can't even be disabled. Setting the target temperature to 10C will close the valve. Best regards, Volker- Reply
Hallo,gibt es die Möglichkeit, beim Thermostat einen Maximalwert einzustellen? Also das man die Temperatur auf z. B. nur 22 °C einstellen kann und nicht höher?