All features of Eve Water Guard
A flood isn’t the only thing that causes water damage – those constant drips, trickles and puddles are often signs that damage is being done and disaster’s about to strike. This is why Eve Water Guard uses a sensing cable to monitor every critical nook and cranny of your home. You can also extend it to suit and lay it any which way you want.
So, if the worst happens and any part of the sensing cable gets wet, the siren on Eve Water Guard will go off, the accessory will flash red and, thanks to HomeKit’s special support for sensors, a notification will be displayed on your iPhone (if you’ve got a home hub). This makes Eve Water Guard an unparalleled water leak detector in terms of its full range of functions, wide-area monitoring and the reassuring feeling it offers.
Read on to learn more about what functions Eve Water Guard has and how you can use this accessory.
Siren, flashing light and text message alert
As soon as water penetrates the sensing cable’s braiding, the 100 dB siren on Eve Water Guard will sound and the LEDs on the rear of the accessory will flash red to serve as an additional visual alert. The red LEDs will continue to flash for as long as water is detected, but you can mute the siren via the Eve app – which is a breeze to do as the option pops up the moment you launch the app, provided of course a leak has been detected.
HomeKit or the home hub (HomePod, HomePod mini or Apple TV) will also provide a key additional alert in the form of a notification if the alarm gets triggered. This means you can have notifications sent to your iPhone so you’ll never have to be greeted by the worrying sight of water leaking everywhere should you be away from the source of the leak at the time or out of earshot of the siren.
All you have to do is make sure you’ve set up your HomeKit hardware correctly in the Home app: Go to the Home or Rooms view. Now use a 3D Touch or Haptic Touch gesture on the Eve Water Guard icon and then tap the gear icon in the detail view. Tap Status and Notifications, then activate Notifications on This iPhone.
Sensing cable, placement and testing
Thanks to electronic wizardry, Eve Water Guard knows the instant the sensing cable gets wet (for the techies out there: Eve Water Guard uses a resistive sensor whereby the ohmic resistance is changed if water penetrates the cable). Thanks to this principle, you can extend the sensing cable to an incredible 150 meters using the two-meter extension cables – enabling Eve Water Guard to monitor every nook and cranny of even the largest rooms or spaces, and not just the area directly beneath the wall outlet.
Hooking up the sensing cable to the base unit as well as connecting each section of cable couldn’t be easier either thanks to the 3.5 mm jack plug connectors, which ensure everything connects together securely and reliably for total peace of mind.
You can also lay the cable any which way you want: Lay it in a circle to monitor your washing machine, clothes dryer, pumps and other free-standing appliances; loop it under your sink; or run it along the wall parallel to your basement windows. Once you’ve laid the sensing cable and added Eve Water Guard to your HomeKit home, the next step is to test the alarm.
You can test the alarm standing near the base unit without fear of your ears being blown off as the siren will ring out at a softer level.
To get started, open the Eve app and tap Settings > Accessories > Eve Water Guard > Alarm Test > Start Alarm Test. You will then see a notification saying that HomeKit will consider the test alarm to have been triggered by an actual leak and so will send notifications to all connected and invited people. As such, be sure to pre-warn everyone that you’re about to run a test, then tap Continue.
You now have a three-minute window in which to wet the sensing cable to check the acoustic and visual alarms as well as the HomeKit notification function. If necessary, turn off Wi-Fi and Bluetooth on your iPhone. This will enable you to check your home hub is working correctly and ensure you receive notifications even when you’re not at home.
Now simply plunge part of the sensing cable into a bowl of water.
The alarm will now go off: You’ll hear the siren; you’ll see the base unit flash red; and you’ll be notified by the Eve app and receive a HomeKit notification on your iPhone. Tap Done and the Eve app will end the procedure and log that you have completed the alarm test successfully. You can view the log by tapping the list icon in the detail view of Eve Water Guard.
By default, the Eve app will prompt you to retest the alarm every three months. However, you can customize this interval and opt to be notified every 30 days, 3 months, 6 months or annually.
No bridge or starter set required.
Eve Water Guard works right out of the box, eliminating the need for additional accessories. You’ll need a home hub (HomePod, HomePod mini or Apple TV) to receive notifications and run automations.
Increase the reach of your devices
Add HomePod mini or the new Apple TV 4K to your home and your latest-generation Thread-enabled Eve Water Guard will be able to communicate via Thread – the mesh network that reaches even the farthest corners of your abode. This happens automatically without you needing to configure anything. Full Thread Devices (FTDs), such as Eve Water Guard or Eve Energy, can act as a router node and relay data packets from other Thread devices.
To view the structure of your Thread network and see where you can make improvements, simply go to the Settings area of the Eve app and tap Thread Network. Among other things, you’ll be able to tell which nodes your Thread devices use to communicate and whether you can further improve the stability and reach of your network and devices by adding one more FTD or moving one to a better location.
100% privacy
Eve accessories are designed to safeguard your personal data. All data is fully encrypted and only transferred directly between the Eve accessory and iPhone, iPad or home hub. Strong encryption verification during each connection attempt makes sure that only you hold the key to your home. Learn more
Learn here how to install Eve Water Guard
Requires iPhone or iPad with the latest version of iOS/iPadOS, notifications away from home require a home hub
Requires iOS/iPadOS 16.4 (or later) / Android™ 8.1 (or later), Matter controller / Thread Border Router
Posts you might also be interested in.
Five places where Eve Water Guard adds a watertight layer of protection
We’ve identified five potential problem areas where you should use Eve Water Guard to protect your home.
All features of Eve Thermo
The multi award-winning Eve Thermo smart radiator valve is quick and easy to install and set up. And with a bit of fine-tuning, it can unleash all the convenience that connected heating has to offer. Read on for a detailed overview of all the functions Eve Thermo offers.
Schedules: Automate your lighting, heating and more
Eve Energy, Eve Energy Strip, Eve Thermo, Eve Aqua and now Eve Light Switch – many Eve accessories support autonomous schedules.
- Reply
Hello Hymced!To get notifications you have to set this in the app Home from Apple and would need an Apple TV 4/4K or HomePod to receive it even when remote.
The 100 dB alarm on the accessory will start once a leak is detected, This can't be disabled. The notifications you get on the iOS accessory is a HomeKit based notification and this can be disabled.
Best, volker
- Reply
Can you silent the alarm when you are not home? Also, can it just be a notification on your phone without an alarm as well, can the alarm on the device be turned off altogether?- Reply
Hello Dylan!No, the alarm can't be muted, not for Eve Smoke and not for Eve Water Guard. Best regards, volker
- Reply
Where can sensor cable extensions be purchased from?- Reply
Hello Paul!The Eve Water Guard Extension be purchased in our web store at Amazon and many retailers.
Best regards, Volker
- Reply
Thanks for reply! I was hoping it could serve double duties is all.- Reply
Sounds like a great device to add to my getting smarter home. I was curious if its also possible to use the water guard device as an action to a trigger in homekit, or eve? I dont have any sirens in my small space, and was wondering if the siren could be triggered if say a contact sensor was open, or door open.Thanks,
Jace
- Reply
Hello Jace!I think you are mixing up some here. Eve Water Guard can act as a trigger. When water is detected the trigger fires and it could shut off a washing machine that is attached to an Eve Energy - this can be done.
What you want to do: Use a HomeKit enabled contact sensor as a trigger and Eve Water Guard in a scene to be executed.
This is not possible, sorry. Eve Water Guard alarm is for the accessory only.
Best regards, volker